- The system can be programmed to set the ON/OFF duration to which the pump has to be operated
- The system has four digit seven segment LED display of time and programming
- There are only three push button Down ,Set, UP membrane key switches for complete programming procedure
- The system has built-in memory to store the status of operation and Programmed ON and OFF time duration.
- You can Manual button can reset off time for double push/Press.
- Dry run time set manual for individually increase /decrease time for dry run timing.
- You can choice for motor manually on automatically off for Auto/Manual mode select
- The system memory is nonvolatile, i. e. it retains all the stored information even in case of power failure
- The system comes with Industrial Grade Electronic Components, Reliable Power Supply and Power Contactor in power coated metallic Enclosure
- The system is adoptable for any kind of starters of both Single phase and Three phase Motors
- This system is suitable for Residences, Commercial complexes, Residential Apartments and Industries
- The system has three position Power Control Toggle/Rocker Switch with “Auto” mode, “Off ” mode and “Manual” mode
- when is its full OHT/Sump In “Auto/ Manual” mode the Pump set can be level controlled.
- On time shows green color Led and Off time shows red color Led indicate easily we can find out.
- The system comes with One Year Guaranteeagainst manufacturing defects
CYCLIC TIMER WITH WATER LEVEL CONTROLLER MODEL
CYCLIC TIMER WITH WATER LEVEL CONTROLLER MODEL
This model is a cyclic timer with Water level control which is suitable for Borewell with limited water source to operate periodically In some places Borewell will pump water for few minutes ranging from 3 minutes, 60 mins, 90mins after which it will stop pumping pertaining to lowering of water table in the bore The water table will resume after some time which again ranges from one hour to 10 hours In such cases the pump has to be operated with required ON duration and OFF duration